Jual Flow Meter Vemmtec IGTM Turbine Meter Gas Meter

Deskripsi IGTM Gas Turbine Meter Vemmtec

General

The vemm tec IGTM (International Gas Turbine Meter) is a highly accurate flow meter, approved for custody transfer measurement, equipped with electronic pulse outputs and a mechanical counter. 
This document explains the dimensions, ranges, performance, calibration and outputs of the instrument. It details the installation, safety requirements and material specifications.
The IGTM measures gas volume flowing through an annular passage in the meter. The flowing gas volume is totalised on a local mechanical counter. In addition, low or high frequency pulse signals are generated to infer the gas flow and volume.
The indicated gas volume is the actual volume flowing through the meter at the actual temperature and pressure. The IGTM is available in two models: CT and IM. The IGTM-CT is used for high accuracy and custody transfer applications.
The IGTM-IM is an economically priced meter with a good accuracy.

Operation

The operation of the International Gas Turbine Meter is based on the measurement of the velocity of gas.
The flowing gas is accelerated and conditioned by the meter´s straightening section.
The straightening vanes prepare the gas flow profile by removing undesired swirl, turbulence and asymmetry before the gas flows to the turbine wheel. 
The dynamic forces of the flowing fluid cause the rotor to rotate. The turbine wheel is mounted on the main shaft, with special high precision, low friction ball bearings.
The turbine wheel has helical blades that have a known angle relative to the gas flow. The conditioned and accelerated gas drives the turbine wheel with an angular velocity that is proportional with the gas velocity.
The rotating turbine wheel drives the index head with the eight digit mechanical counter via shafts and gears.
The volume and flow rate can also be indicated electronically. A proximity probe generates a signal at each passing blade of the turbine wheel. 
With the device-specific K-factor and the number of pulses the passed volume can be calculated. With the measured frequency the flow rate can be determined.