Distributor Flow Meter Avery Hardoll CM Series 4 Capsule

Description

Flow Meter Avery Hardoll CM Series CM 5000 , CM 5500

CM SERIES METERS
Avery-Hardoll bulkmeters are precision made, positive displacement, liquid measuring instruments,which maintain accurate metering over long periods of operation. Simplicity of design and construction together with sustained accuracy make these meters ideally suited for use on aviation refuelling vehicles and in oil terminals.
OPERATION
The positive displacement principle is the ONLY accurate method of measuring fluid flow. No other technology can achieve such accuracy because measurement becomes inferred, that is indirect and subject to assumption.The Avery Hardoll bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.
The product enters the meter through the inlet manifold (1) and causes the rotor (4) to revolve by pressure on the vanes (3).
The proximity of the rotor (4) to the body (2) forms an efficient seal, whilst the profile of the casing ensures that the vanes (3) are guided through the measuring crescent (5), where the volume of product is accurately measured.
An extension shaft driving through a pressure tight gland in the meter front cover, transmits the rotor revolutions to the calibrating gearing 6) which drives the counter (7).

CONSTRUCTION
MANIFOLD: Ductile iron (single/double capsule)
Fabricated steel (all builds)
Cast Aluminium (6’’ Triple only)
BODY: Ni-Resist cast iron
VANES: Carbon
ROTOR: Aluminium or Ni-Resist cast iron
COVERS: Carbon Steel
BEARINGS: Stainless steel
SEALS: High Nitrile or Fluorocarbon

Reviews

There are no reviews yet.

Be the first to review “Distributor Flow Meter Avery Hardoll CM Series 4 Capsule”

SKU: 117 Category: